Payment & Shipping Terms:
|Type:||1400/ 1200 / 1000||StepChainPitch (P):||135.46|
|Pin Dia (D):||15/20/25D||RollerSize (D1 X H):||76.2 X 22|
|Axle:||Solid||Environment:||Indoor / Outdoor|
|Axles Connection:||Fixed Type||Lubrication:||Oil|
|Step Fixing:||Clamp Bush||Suitable For:||610NPT|
pitch 135.46 Escalator Step Chain,
Escalator Step Chain CNAS,
25D Inside roller Chain
The most public moving walk is used roller inside link pallet chain. This type of moving walk are mostly used in shopping mall, airport, public transportation hub and metro, etc place. Pallet chain is the critical component in moving walk for driving pallets transporting passengers. There are strict required of product quality and safety. After perennial use, if the pallet chains have worn out and reached its design service life, it must be replaced timely and propertly
|76.2 x 22||clamp bush||90|
|P1354-20-cs||oil||20||Fixed||solid||76.2 x 22||clamp bush||150|
|P1354-25-cs||0il||25||Fixed||solid||76.2 x 22||clamp bush||190|
Chain pitch P = 135.46mm, 3P = step distance = 406.4mm, Pallet chain is used oil lubrication.
The pallet chain is connected to its left and right side link by solid axles. The solid axles of pallet chain are fixed with chain link plate for transportation. The type of pallet chain have 800, 1000, 1200,1400, 1500 and 1600 for moving walk width.
The pallets are fixing with pallet chain axles through plain clamp bush fastening
The pallet chain rollers are made by hydrolytic resistant polyurethane. All rollers have passed eligibility tests include anti-hydrolysis 250 hours, oil hydrolysis 250 hours and life test running time 5000hours.
|Step chain roller eligibility test|
|Water hydrolysis test||Oild hydrolysis test||life time running test|
|250 hours||250 hours||5000 hours|
The pallet chain roller hub is used polyamide 66
Unit of chain ordering code
|Product series||Roller size||Moving walk Width||10 Folds chain||2 Folds chain||Offset link|
The pitch 135.46mm roller inside link pallet chain is used in public moving walk with a pallet distance of 406.4mm. It is suitable for moving walk product 610NPT.
Producti and Quality Control
The pallet chain is made by Industry-Renowned pallet chain suppliers. The entire pallet chain manufacture process includes meterial imgress, component machining, part heat treatment and final assembly with quality control plan to eansure each pallet chain achieved original design requirement. The quality level is consistent with international first-class brand escalator pallet chain.
All type pallet chain achieved CNAS type test certificate.
Our professional engineering team can provide technical support to help clients identify the appropriate pallet chain specifications to meet safety and lifetime requirements.
We kindly request our clients to provide us with any documents related to the escalator chain, e.g. technical service reports, spare parts numbers of the chain, drawings of the chain, breakage load certificates/breakage load calculations, etc. These documents can considerably speed up an inquiry and clarify discrepancies. To avoid any risk of providing a non-functioning chain, complete this questionnaire and an identification template with detailed photographs of the link plates, rollers, step pins, axles, axle parts and markings on the components. Please fill in the following points and chain templates as completely as possible. If the template deviates from the chain to be measured, sketch, measure and photograph the deviation in detail.
Contact Person: Mr. Jiang