Payment & Shipping Terms:
|Type:||Commercial Escalator||Code:||GB16899/EN115: 2017/ASME17.1|
|Balustrade:||Glass||No. Of Flat Steps:||2 / 3|
|Energy Saving Model:||VF Drive||Environment:||Indoor/Outdoor|
|Step:||Aluminum / Stainless Steel||Floor Plate:||Aluminum / Stainless Steel|
outdoor environment Moving Walk Escalator,
E06 Moving Walk Escalator,
width 1000 escalator glass balustrade
Our E06 type of commercial escalator is developed by our international vision and experienced professional technical design team.
The product highlights its personalized design, professional technology, unique characteristics, safe and reliable, excellent operating performance, high efficiency and energy saving, fashionable appearance.
The concept of safety and green environmental protection makes the E06 type escalator products constantly operate under safe, low cost, low noise, low power consumption, no oil pollution, and quiet and nat ural conditions, bringing a highly tempting ride experience to the passengers.
E06 type commercial escalator can be widely used in a variety of commercial occasions and the environment in indoor or outdoor:
Basic Technical Specifications
Key Component Mature Personalized Design Highlight
Product basic structure description
The escalator truss is using angular profile welding steel structure design. Its upper chord and lower chord use angular steel L125x180x8. The truss can support rise up to 8 meters. The length 15830mm is the maximum DBE (distance between two end support) of escalator, and with one intermediate support, the cross distance between end support can reach length 30600mm. The deflection of truss is less than 1/750 which is verified by calculation and confirmed through full load test according to the code EN115 requirement. The truss is powder coated for corrosion protection for indoor unit and apply hot dip galvanized for outdoor application. The truss can be designed split into 2 or 3 pieces for container shipment.
The driving machine is designed to use worm gearbox reducer as standard configuration and helical gearbox reducer optional. The motor is a high efficiency design which energy efficiency level IE2 as standard and supper high level IE3 optional.
Step chain and step
The step chain is designed for its pitch is 133.33mm, which is a popular size in the industry to support the step distance of 400mm (133.33x3). Hence, the spare part for them is available and popular in the spare part market. Two kinds of steps will be provided, standard for entire die cast Aluminum step, assembly type stainless steel step is an option. The steps are powder coated with black or gray color. With three sides yellow demarkation optional.
The track system consists of upper curve, lower curve and incline section. The upper curve and lower curve is welding track block design.
The incline section track are track profiles structure which profile edge as guidance function for step chain roller and step roller running. This personality structure design is beneficial to the reliability and stability of the running guide of the steps and reduces the lateral movement.
The balustrade is the safety glass panel, handrail center slimline modern design. The LED under handrail lighting, brush guard lighting and comb lighting are optional features for escalator appearance beauty. The skirt panel, inner and outer decking use 2 mm hairline stainless steel sus304. The exterior panel will be customized design and material use 1.5 mm thickness stainless steel sus304.
Comb support plate
The comb support plate area is an extreme safety risk range and needs to be focused on. We have reinforced the comb support plate strength so that under the condition applying the load 6000N/mm2, its deformation is not more than 2mm. The upthrust track entend into the comb plate design is one of our safety measures to garrenty steps not lift up hitting comb.
Lubrication device is an efficient gear pump device for better lubrication. It is a green design to reduce oil waste and avoid environmental pollution.
The control system consists of a controller and safety devices which are compliant with EN115:2017 code requirement. The controller applies microprocessor control board and equips all kinds of safety switches and different sensors to monitor escalator running. The controller supports VF drive to switch into idle model to lower escalator speed for energy saving.
Standard Safety Device - EN115:2017 requirement compliant
|1||Lack of phase or errot phase protection||In case detected lack of phase or error phase, the escalator will automatically stop the operation.|
|2||Motor overload protection||When the current is over 15% the escalator will stop automatically.|
|3||Electrical appliance loop protection||It offers the automatic circuit disconnection device to protect the circuit and power supply components of escalator.|
|4||Handrail entry protection||Protection will activate to stop escalator running upon detection of objects jammed into handrail entry.|
|5||Comb plate safety device||When some foreign subatance has been clipped in or between the combs, the escalator will automatically stop the operation|
|6||Step sagging protection device||When the step is detected broken or serious deformation, the escalator will stop running automatically before then step entering into the comb plate.|
|7||Main Drive Broken Chain Monitoring Device||When the main drive chain has over stretched or broken, the monitoring device will be activated to stop the escalator operation.|
|8||Step Chain Safety Protection||When the step chain has over stretched or broken, the protection device will be activated to stop the escalator operation.|
|9||Over speed protection||Apply sensor to monitor the main drive sprocket speed directly, protection will activate upon detection of operating at the speed 20% higher than rated speed, the main power supply will be cut for escalator stop operating. If the escalator is over 6 m rise , the equipped with an auxiliary brake, then this emergency brake device will be activated to brake the escalator running.|
|10||Un-Intentional Reversal Protection (NRD)||Apply sensor to monitor the main drive sprocket rotation direction, protection will activate upon detection of unintentional reversed movement (from the set direction) of the steps and handrails, the escalator be stop operating. If the escalator is over 6 m rise, the an auxiliary brake is equipped, then this emergency brake device will be activated to brake the escalator running.|
|11||Demarcation line||The yellow demarcation line is located in the front position and two sides of the step tread to warming passengers step away the risky area to avoid being entapped into the gap between the edge of the adjacent step and at the gap between the skirt panel.|
|12||Emergency stop button||Push the emergency stop button to stop the escalator in case an accident happens.|
|13||Skirt Panel protection||When some foreign substance has been clipped in between the skirt panel and the step, the escalator automatically stops the operation.|
|14||Brake protection||When the electric force falls short of supply or it acts any of the safety device, the working brake function goes into effect by the safety device through the spring resilience action for braking the escalator to stop the operation.|
|15||Safety inspection switch||It is a safety device to prevent the escalator from starting during the inspection and maintenance.|
|16||Under step lighting||Illumination exists in the upper and lower ends of the escalator , the lower part of the step in order to remind the passengers of the security matters.|
|17||Alambell starting device||The alarm bell rings when it starts the escalator in order to remind the passengers of the security matters.|
|18||Handrail broken device||When the handrail is breakage, the escalator automatically stops the operation.|
|19||Handrail speed monitoring device||Protection will activate to stop escalator upon detection of a handrail speed deviation of more than +- 15% to the step speed within a time frame of 5 to 15s.|
|20||Skirt Panel Bush Guard||The brush guard has been installed between the skirt panel and the steps will prevent the passengers from touching the skirt panel.|
|21||Missing step device||A missing step can be detected and the escalator stopped before the trap window emerges from the comb.|
|22||Brake releas detection||Brake adding detection switch prevents the motor running without brake release to avoid burning the machine motor.|
|23||Floor plate Contact Device||Protection against the risk of passengers and maintenance people falling down into the machine room where the floor plate is removed. Service people have to use an inpsection box to run the escalator by the inspection model under the condition of floor plate being removed.|
|Optional Safety Device|
|24||Auxiliary Brake||For rise < 6 m escalator as optional enhancement safety device|
|25||Fire-proof rolling door device||When this device comes action, it can stop the escalator operation. This device has to be installed near the escalator in the building.|
Escalator Safety Device Arrangement
Three typical purchasing configurations for select to meet customer different needs of focusing the consideration on the safety, efficient, reliable, fashion appearance or other area:
Standard - Adequately meets the basic function needs of the escalator.
Professional - Totally meet the needs of various functions commonly used in escalators, equipped with variable frequency drive energy saving function. Priveded comb lighting and skirt panel brush lighting.
Deluxe - Completely meets the needs of various functions of the escalator, equipped with variable frequency drive energy saving function, the driving machine adopts higher efficiency spiral bevel gear reducer, provide a variety of lighting to beautifier the escalator, the use of 2mm thick stainless steel and other advanced materials, 4 liters of large capacity oil can and other luxury configurations.
If customized escalator products are needed, please contact us forthe escalator special configuration discussion.
Matrix of three typical purchasing configuration
|Safety Configuration||Comb with Yellow Warning||/||✔||✔||/||✔||✔|
|Emergency stop interface in case of fire||/||○||✔||/||○||✔|
|Building interface and maintenance safety package||/||✔||✔||/||✔||✔|
|Under Step Lighting||/||/||✔||/||/||✔|
|Energy Saving||Gear Box||Worm Gear Box||Worm Gear Box||Helical Gear Box||Worm Gear Box||Worm Gear Box||Helical Gear Box|
|Energy Saving Mode||Continuous operation||Idle speed with standby VF||Intermittent operation with standby VF||Continuous operation||Idle speed with standby VF||Intermittent operation with standby VF|
|Decoration||Skirt Panel Lighting||/||/||○||/||/||○|
Step/Step Chain Roller Cover
|Others||Fuel tank capacity||2L||4L||4L||2L||4L||4L|
|Lubrication float switch||/||✔||✔||/||✔||✔|
|Fault indication in upper landing||/||✔||✔||/||✔||✔|
We provide escalator preassembly service. Customers can order a semi-product which is an entire escalator except controller where offered by local supply in order to meet the needs of the local special.
Layout Drawing (Continue)
Contact Person: admin